If you're new to Vibrant projects or want an easy way to order, this DMX lighting starter kit has got you covered. Included is everything you need to run an RGBW system that's controlled by DMX. Snap One has handled all the calculations and bundled the gear for you so you can focus on other important tasks.

Each kit includes:

1 C4-LP-RGBW-16 Control4® Vibrant Lighting - Performance RGBW Linear Light
1 C4-PS24-96 Control4® Vibrant Lighting - 96W 24V Power Supply
1 C4-DX-DEC-5 Control4® Vibrant Lighting - 5-Channel DMX Decoder
1 C4-LEEL5-U-3F Control4® Vibrant Universal Extrusion and Lens (5-Pack) – 3.2 ft (1m)
1 HDR-60-24 Mean Well DIN Rail 60W 24V Power Supply
1 CRE-eDIDIO-10-1X Creative Lighting DMX Universe Digital Lighting Gateway



Performance RGBW Linear Light
Give your customers a state-of-the-art lighting experience with an exquisite ambiance using Vibrant Linear Lighting. Alternating 3-in-1 LEDs with 3000K warm white LEDs provide a dynamic color range extending past traditional RGB. With Vibrant, you can create millions of color possibilities with stunning brightness and vivid color saturation.


96W 24V Power Supply
The 96W 24V linear lighting power supply provides power for the DMX or Zigbee control module as well as the Vibrant Linear Lighting LED tape, which can then be toggled and dimmed with a Control4® dimmer. With its low-profile aluminum enclosure that includes knockouts, installation is easy in any low-voltage application.


Control4® Vibrant 5-Channel DMX Decoder
Vibrant 5-Channel DMX signal receiver/decoder is installed in-line between the Creative Lighting DMX Gateway and the Vibrant tape light. This decoder translates DMX signals into the PWM control signal used by RGB and tunable white LEDs and allows for flawless integration into new and existing DMX installations. Seamlessly integrate color-changing tape light easily for temporary or permanent applications.


Mean Well DIN Rail 60W 24V Power Supply
The HDR-60-24 is a 60W 24V power supply for use with the Creative Lighting eDIDIO Ethernet Gateways. The power supply is ultra slim and adaptable to be installed on DIN Rails (TS-35/7.5IN or TS-35/15 mounting rails).




Creative Lighting DMX Digital Lighting Gateway
The eDIDIO Series 10 controller is a compact workhorse that allows ethernet and low-level interfacing to DMX lines for communication between a Control4® system and any DMX-controlled device.


Universal Extrusion and Lens (5-Pack) – 3.2 ft (1m)
Due to the channel depth, this extrusion diffuses light from any SKU of indoor LED tape with zero LED spotting. For greater illumination, install two rows of tape on the side walls of the channel or side-by-side on the floor.