top of page
Atlona® 4K/UHD HDMI HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optica
The Atlona® AT-UHD-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, Power over Ethernet (PoE), and optical audio from receiver to transmitter. 
Atlona® 4K/UHD HDMI HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optical Audio
The Atlona® AT-UHD-EX-100CEA-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, Power over Ethernet (PoE), and optical audio from receiver to transmitter. This extender kit transmits video signals up to 4K/UHD @ 60Hz, 8-bit color, 4:2:0 chroma subsampling with embedded multi-channel audio and remote 48V power for the receiver. A digital audio pathway returning back across the HDBaseT link from a smart TV to an AVR routes multi-channel audio using TOSLINK optical connectors. Additionally, this kit extends Ethernet, RS-232, and 12-volt based IR control commands. This kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature one-third rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.
4K/UHD Capability
  • Compatible with Ultra High Definition sources and displays 
  • Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 Compliant
  • Adheres to latest specification for High-bandwidth Content Protection 
  • Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Receiver to Transmitter Digital Audio Pathway
  • Routes multi-channel audio from TV to AVR on same extender and cable as video from set top box to TV 
  • Eliminates extra cable needed to bring high quality audio from embedded TV apps            
Ethernet, RS-232, and Bidirectional IR
  • No additional control cables required 
  • Saves time and money during installation
Remote-Powered Receiver  
  • Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT 
  • Saves time and integration costs             
Extended Distance HDMI Extension
  • Transmits HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable  
  • Uses easy-to-integrate category cable for low-cost, reliable system installation
     

Atlona® 4K/UHD HDMI HDBaseT TX/RX with Ethernet, Control, PoE, and Return Optica

SKU: AT-UHD-EX-100CEA-KIT
$0.00Price
Excluding Sales Tax
Quantity
  • Specs
    Specifications
    AT-UHD-EX-100CEA-KIT
    HDMI 2.0b, HDCP 2.2
    4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
    NOTE: 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampli
    2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
    NOTE: All VESA resolutions are 60Hz.
    YUV, RGB
    4:4:4, 4:2:2, 4:2:0
    8-bit, 10-bit, 12-bit
    4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)
    PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus™, Dolby TrueHD, DTS-HD Master Audio™, Dolby Atmos®, DTS:X®
    32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
    Up to 64-bit
    HDMI In/Out: 30 feet (10 meters)
    CAT5e: 330 feet (100 meters)
    CAT6/6a/7: 330 feet (100 meters)
    HDMI In/Out: 15 feet (5 meters)
    CAT5e: 295 feet (90 meters)
    CAT6/6a/7: 330 feet (100 meters)
    Transmitter: LAN - 1x RJ45; Optical Audio - 1x TOSLINK; Power - 48V, 2-pin captive screw
    Receiver: LAN - 1x RJ45; Optical Audio - 1x TOSLINK
    Transmitter: 1x Type A, 19-pin, female, locking
    Receiver: 1x Type A, 19-pin, female, locking
    Transmitter: 1x Mini Type B (firmware); Receiver: 1x Mini Type B (firmware)
    Transmitter: 1x 5-pin captive screw
    Receiver: 1x 6-pin captive screw
    Transmitter: 1x RJ45
    Receiver: 1x RJ45
    20.61W (when TX and RX are paried)
    100 – 240 V AC, 50/60 Hz (external supply)
    48 V DC, 0.83 A (external supply)
    32-122°F (0-50°C)
    20-90% non-condensing
    Transmitter: 1.02" x 5.75" x 3.5" (26 x 146 x 89 millimeters)
    Receiver: 1.02" x 5.75" x 3.5" (26 x 146 x 89 millimeters)
    Transmitter: 0.89 lb (0.402 kg)
    Receiver: 0.87 lb (0.396 kg)
    CE, FCC
    External Supply: CE, FCC, cULus, RoHS, CCC, RCM
     
    HDMI Compliance
    Video Resolution
    VESA Resolution
    Colorspace
    Chroma Subsampling
    Color Depth
    Video Processing
    Audio Pass Through
    Supported Sample Rates
    Audio Bit Depth
    Transmission Distance
    Transmission Distance - 4K/Ultra HD
    Connectors
    HDMI Connections
    USB Ports
    RS-232 Ports
    HDBaseT Connections
    Power Consumption
    Power Input
    Power Output
    Operating Temperature
    Operating Humidity
    Dimensions (W x H x D)
    Weight
    Certifications
bottom of page